Hacks and Patches http://mail.personal-view.com/talks/categories/hacks/feed.rss Fri, 23 Feb 18 13:03:07 -0700 Hacks and Patches en-CA Eoshd Hacks http://mail.personal-view.com/talks/discussion/18861/eoshd-hacks Wed, 24 Jan 2018 23:03:23 -0700 nicholsonRUIZ5 18861@/talks/discussions Greetings folks! Does anyone still happen to have EOSHD Unified Patch and Vanilla Hack? The files are no longer accessible on Andrew Reid's website.


GH2 Sanity X VS. FlowMotion V2 http://mail.personal-view.com/talks/discussion/17076/gh2-sanity-x-vs.-flowmotion-v2 Thu, 01 Jun 2017 17:26:57 -0600 Sanguix 17076@/talks/discussions Hi,

I know there is a lot of topic on this but I still can't make a clear decision. I'm going to film Podcast and concert, which of the 2 would handle these type of setting best?

Ma petite ami. Fashion film. Gh2 alive. http://mail.personal-view.com/talks/discussion/18291/ma-petite-ami.-fashion-film.-gh2-alive.- Tue, 21 Nov 2017 06:24:12 -0700 endotoxic 18291@/talks/discussions This sensor. What can I say. This lovely machine hacked is a special thing. Gh2 + rokinon cine 1.5 + moon t8 hack. Shot on B&W in camera.

GH2 RELOADED http://mail.personal-view.com/talks/discussion/15127/gh2-reloaded Thu, 26 May 2016 11:42:15 -0600 frullaccia 15127@/talks/discussions Into the Full HD world, our GH2 camera and Panasonic processor have still much to give us. This new hack is based upon my personal Gop 1 development. But almost every single parameter has been adapted to match some original and extreme choices. I made all possible to get a neat and rich picture. It has been a step-by-step hard work. In particular the hbr mode was very difficult to manage. To tell the truth, I didn't touch the 1080i60 and 720p60 modes, which are taken by Apefos' The End patch.
I hope that somebody will find useful and beautiful our new used GH2.

GH2 720 50P Intra patch? http://mail.personal-view.com/talks/discussion/15430/gh2-720-50p-intra-patch Wed, 27 Jul 2016 11:20:47 -0600 xavi_AL 15430@/talks/discussions Sorry for my English It is possible for the Panasonic GH2 patch 720 50P intra ?

Thank you

OLD DINOSAUR GH2 ALL INTRA AND GOP 2 http://mail.personal-view.com/talks/discussion/17935/old-dinosaur-gh2-all-intra-and-gop-2 Mon, 09 Oct 2017 07:39:05 -0600 frullaccia 17935@/talks/discussions MANTRA & ZO. ALL-INTRA PATCH FOR GH2 (INCLUDING 1280X720). ZO. GOP 2 OPTION FOR 1280X720.

Mantra is the only existing all-intra hack for Panasonic GH2, including a stabilized 720p50 version. Mantra is for Pal system.

IMPORTANT! All-intra 720p50 mode has limitations. Using this, the camera sensor needs much more light than before. When shooting in low light or shooting in dark areas, the camera could freeze. Furthermore: choose the right iso settings. When shooting outdoor (daylight) a 720p50 GOP1 is fine. For low lights and indoor shootings use Zo, the GOP2 patch version.

Mantra and Zo 1080p24 shoot at 23,976fps.

GH2 Hacked - SanDisk Extreme Pro 95MB - Video stops at varying time without error http://mail.personal-view.com/talks/discussion/2854/gh2-hacked-sandisk-extreme-pro-95mb-video-stops-at-varying-time-without-error Fri, 13 Apr 2012 10:07:56 -0600 thomasklosinsky 2854@/talks/discussions Hi guys,

I searched the forum and the whole internet for this problem, but didn't find any post or anyone having this problem, so I started a new topic for this and hope I didn't search for the wrong keywords... ;). I am using the GH2 for video shooting very short time and all I am doing these days is not really working well. I know that it should be easy to use firmware patches but for me it turns out not to be that easy as it maybe should. I used a few patches and tested around with each for quite a bit and tried to check wether the patch is working fine or if there are occuring errors while recording. I would need a very stable patch since I always need to record longer footage... not just 15min, but most of the time 2-3 hours. I found that SD card speed is a thing which is why I bought the SanDisk Extreme Pro with 95MB/sec. Used the Sanity 4.1 Patch which should be stable, but the cam stops recording video after some time (I couldn't specify when it does) without any error. It just stops recording and doesn't write the file completely to the card. Used the Quantum X SpanMyBitchUp and I get the same error. Also tried some other patches, some came up with errors that the card is not fast enough, some didn't... most of them didn't...

Since I can't tell why that is and I don't know how to find out why the cam stops recording I am not sure what to do next. Fact is that the patches really do enhance the quality which I would not love to miss ;).

Can anyone help me with this? All the best from Hamburg, Thomas

Costum Cropmarks / Framelines for Sony Alpha http://mail.personal-view.com/talks/discussion/17626/costum-cropmarks-framelines-for-sony-alpha Mon, 28 Aug 2017 10:08:49 -0600 jeffcostello 17626@/talks/discussions Sony alpha cameras always take images in aspect ratio 3:2 but you can choose a 16:9 overlay if you prefer to take images in 16:9. As the camera always saves the images in 3:2 you need to crop the images later in photoshop to 16:9. Unfortunately 16:9 is the only alternativ format you can choose and I would love the possibility to see black overlays in any aspect ratio i want.

For canon cameras there is a reverse engineered software called „Magic Lantern“. One option within this software is the possibility to create your own cropmarks / overlays. You just create a photoshop file with two layers. A white background layer and a second layer with whatever shape you want. When you copy this photoshop file on the SD Card of your camera you can load it onto your camera. The second layer with your shape will then bye shown as an overlay. It´s meant to use it for different aspect ratios but you can also draw a flower and let it appear on your camera liveview.

Here is a link to that software: http://magiclantern.wikia.com/wiki/Cropmarks

For Arri cameras you habe the following option to create costum Framelines:


For Sony cameras there isn´t such thing but there seems to be a way to build android apps and install them on the camera to create new functions. My question is:

Is it possible to built an app for sony cameras that lets you create costum overlays that show in camera live view?

Best, David

Panasonic G3 Stable Settings http://mail.personal-view.com/talks/discussion/4913/panasonic-g3-stable-settings Wed, 17 Oct 2012 07:59:29 -0600 luisnando 4913@/talks/discussions I managed to fix the writing error on the previous patches messing with the buffer size. Actually I put 170M bitrate and the small shootings I made really passed through with no errors! Since I am still learning about those settings, I would like to ask someone to analyze the data and see if I really got it. Annexed goes my patch.

I based my settings over Driftwood cluster v6 settings.

GH1: 75Mbps Peak Reliability Setting - V2 update http://mail.personal-view.com/talks/discussion/334/gh1-75mbps-peak-reliability-setting-v2-update Tue, 05 Jul 2011 15:00:44 -0600 LPowell 334@/talks/discussions
At the time the original 75Mbps GH1 Peak Performance Patch was released, I along with many other patch developers had reluctantly concluded that a stable Native 24/25p video mode could not be perfected for the GH1. It was not long after, however, that I discovered new stabilization techniques that led to the development of the Blackout-Powell Native 24p Patch and the Max Latitude Native 24/25p Patch. More recently, with Vitaliy's release of PTool 3.56d, all previously unhackable versions of the GH1 have been liberated for use with freshly upgraded versions of my patches.

The primary focus of recent patches has been the optimization of 1080p Native 24/25p FHD video modes. In order to achieve bitrates as high as 100Mbps, however, it was necessary to restrict the 720p SH video modes to 25p in PAL mode and 30p in NTSC mode. For 720p SH mode recorded at the standard 50/60p frame rates, the 75Mbps peak bitrate of the Peak Performance Patch remains the highest I've achieved. With the aid of new stabilization techniques provided in PTool 3.56d, I have been able to significantly improve the patch's high-bitrate reliability as well. Based on the comparison tests I've conducted, the stability of the updated 75Mbps GH1 Peak Reliability Patch is second only to that of my Reliable In-Camera Playback Patch.

Here are short descriptions of the updated properties of this patch:

75Mbps AVCHD 1280x720 SH mode @ 50/60 fps
While the unhacked 720p50/60 SH video mode offers high frame rates, its low 17Mbps maximum bitrate and long-GOP frame compression hamper its ability to track fast-moving subjects. In 60p mode, this patch reduces the length of each GOP to 20 frames, producing 3 key-frames per second. In addition, the codec's 75Mbps peak bitrate allows it to encode a large amount of image detail into each key-frame. Compression efficiency remains high enough, however, to limit average bitrates to less than 50Mbps.

75Mbps AVCHD Interlaced 1920x1080 FHD mode @ 24/25 fps
For those who do not require Native 24/25p video files, this mode produces the highest quality images available from the GH1 in both 24p and 25p interlaced FHD video modes. Turbo-charged with a 75Mbps maximum bitrate, the codec's ability to track moving objects without producing mud is significantly improved. As with the 75Mbps SH patch, the FHD encoder maintains an average bitrate no higher than 50Mbps.

75Mbps MJPEG 4:2:2 Color 1536x864 HD mode @ 30 fps
The MJPEG Intra-frame codec's unique advantage is its ability to produce highly detailed images in 4:2:2 color depth. This is especially valuable in green-screen rotoscoping, where you want to use the highest chroma resolution available. To maximize its usefulness, I've increased the MJPEG frame size to 1536x864 pixels, while maintaining the camera's normal16:9 aspect ratio. This frame size is exactly 20% taller than SH 720p mode, and 80% as tall as FHD 1080p mode. While it is non-standard, the intermediate frame size allows you to either flexibly crop the edited frame down to 720p, or upsample it to 1080p with minimal loss of resolution. And at 75Mbps max, the MJPEG encoder maintains consistently higher bitrates than the AVCHD encoder, particularly in dimly lit situations.

30Mbps MJPEG 960x720 VGA mode @ 30 fps
This iPod-compatible video mode produces HD-resolution 960x720 videos in a standard 4:3 aspect ratio. Its bitrate averages around 30Mbps.

Overall Patch Considerations
While no GH1 patch can claim to be absolutely bulletproof, I have tested these settings in a wide variety of extreme circumstances. However, with bitrates as high as 75Mbps, the safety margin is inherently narrower than my Reliable In-Camera Playback Patch. This patch is designed and tested only for the fastest Class 10 SDHC cards currently available.

Additional points of interest:

* The 75Mbps Peak Reliability Patch is compatible with all hackable GH1 cameras, and is switchable between NTSC and PAL modes.

* I recommend using the camera to format your SD at the start of each shoot, to guard against SD card memory fragmentation.

* Peak bitrates are obtained only with well-lit, sharply-focused, highly-detailed subject matter. Average scenes will produce average bitrates.

* High bitrate AVCHD videos may not play back reliably in-camera. The MJPEG videos produced by this patch will not be playable in-camera.

* If shutter speed is set longer than the frame rate (e.g. slower than 1/60 at 60p), low-quality video files may be produced.

* AVCHD 4GB file-spanning for long video takes may not work reliably at high bitrates. For reliable recording of takes longer than about 12 minutes, I recommend selecting the "H" video mode instead of "SH". This will produce average bitrates of about 28Mbps in 720p50/60 modes.

* For extended recording times at moderate bitrates, selecting the "L" video mode instead of "SH" will produce bitrates comparable to the camera's unhacked SH video mode.

* While AVCHD bitrates may drop to very low levels in extremely dark situations, this patch should continue to record even in total darkness.

*** WARNING ***

The 75Mbps Peak Reliability Patch will not work properly with previous versions of PTool. My thanks once again go to Vitaliy Kiselev, for his pioneering work on PTool, and to cbrandin for his invaluable Stream Parser tool.

The best way to insure that you have the latest PTool release is to download it directly from the following link:

Download PTool here: http://www.gh1-hack.info/ptool3d.zip

75Mbps Peak Reliability Patch Settings File:

This zipped INI file can be used to apply complete patch settings to firmware loaded into PTool 3.56d. To use, unzip the INI file into the same folder as the PTool application. Launch PTool and load the firmware for GH1 v1.32. The settings contained in the INI file will automatically be installed in the "H" button at the bottom of the PTool main window.

Note that with the following PTool Settings File, you may at any time re-install the original Panasonic GH1 v1.32 firmware into the camera. You may also copy each type of patched or original firmware to separate SD cards, and use them to quickly switch between patches as often as you like. ]]>
G85 hack possibility? http://mail.personal-view.com/talks/discussion/17162/g85-hack-possibility Fri, 16 Jun 2017 06:25:22 -0600 Ashley_James 17162@/talks/discussions Any chance that might happen? Thats a great camera with lots of users and it would be so awesome if someone would start working toward a hack! I have so many ideas how to improve this baby. Not only bitrates\framerates, but manual focusing as well (which would solved huge pia with panasonic autofocus). I would gladly donate money for such a project and participate as a tester and ideas generator.

GH2 Driftwood Cluster v6 Issue: CANNOT RECORD. FILE NUMBER EXCEED LIMIT http://mail.personal-view.com/talks/discussion/3910/gh2-driftwood-cluster-v6-issue-cannot-record.-file-number-exceed-limit Sun, 15 Jul 2012 12:30:10 -0600 quadrabay 3910@/talks/discussions Hi Folks,

I'm extremely sorry to be reporting any negative to this AMAZING hack/setting, but I went out on a FREE (Thankfully) Band Shoot last night with my GH2 under the Cluster v6 DrewNet patch. I'm using a SanDisk Ultra 64gb card (30 Mbit/sec) and I set the GH2 to the Lower of the two settings both for disc space and extra stability. With these settings I'm getting 2 Hours and 55 Mins on the card with a 50 Mbit/Sec Data Rate (equivalent to 100ish...Yay!)

After the first set I shut the camera down, and when I re-powered on for the second set (with still an Hour and 50 mins left on the card) it gives me this VERY unpleasant response when I hit the record button...


I gave it my best "college try" with powering down, card in and out, in a desperate effort to get it to record again, but alas it just laughed at me. (and a hacked GH2 has a very unpleasant laugh, let me tell you)

I'm DESPERATELY hoping there's something silly I'm doing, or a work-around that will fix this, as the v6 Cluster was SPANNING LIKE A CHAMP! I've tested it out to almost THREE HOURS more than once and it's doing it. But I've never shut down then tried to resume as I did last night.

If the only solution is to bend over on the price of an Extreme Card, I would gladly do that if it WILL solve this, but I get the feeling it won't and I'll be stuck paying WAY too much for a card that will go for $50 at some point down the road. (That always P's me off...the Ultra 64gb was $45 and it was working FINE other than this new glitch...and I'm not sure it's the card necessarily...I'm under the 60M point...)

Anyhow, I again apologize for reporting less than great news, and I'm truly hoping someone has a solution out there in the land of innovative photographic genius!

Take Care, Erik

PS: With an old Nikkor 50mm f 1.4 lens on the GH2, and in a DARK restaurant - it was like I had a LIGHTING CREW on the band...UNBELIEVABLY nice!

GH2 stopped working at the middle of hacking http://mail.personal-view.com/talks/discussion/16652/gh2-stopped-working-at-the-middle-of-hacking Tue, 28 Mar 2017 11:15:53 -0600 dssob 16652@/talks/discussions Hello, I know.. this is bad. My battery just died when my camera was in hacking process. So I charded it up, pluged it back. My GH2 stopped working, just black screen, no menu, not able to shoot any more, what to do!?

GH2 Died during update of firmware...

BTW.. camera turns on but only I can see black screen...

Appreciate any help,

Thank you,


Olympus em5 ii hack or firmware update for improved video quality? http://mail.personal-view.com/talks/discussion/15852/olympus-em5-ii-hack-or-firmware-update-for-improved-video-quality Fri, 07 Oct 2016 00:17:37 -0600 bokehman64 15852@/talks/discussions I am looking to buy my first real video camera and liked the look of the em5ii. especially because of that amazing stabilization. Unfortunately when I looked at some sample video it looked pretty bad. Is it possible a firmware update or a hack like the one on the gh2 could improve the quality of this otherwise great camera?

Two years worth of hacked Panasonic GH2 shooting - my conclusions... http://mail.personal-view.com/talks/discussion/9181/two-years-worth-of-hacked-panasonic-gh2-shooting-my-conclusions... Mon, 23 Dec 2013 18:50:36 -0700 cblok 9181@/talks/discussions Let me introduce myself, I'm Christiaan Blok. I'm a shooter and director from Sydney, Australia. For two years I've been using a hacked GH2 for my professional work. I've shot interviews, events, short films, corporate, training and commercial video. The GH2 has followed me down mines, up arctic mountains, onto race tracks, across beaches etc.. etc.. You get the idea... I've used it a lot! :-) So, as a little thank you to the hard working people behind the hacking scene I thought I'd post my experiences and conclusions after two years of testing and shooting.


  • PAL GH2. Shooting a mix of HBR & 24p. Shooting people, settings are generally SMOOTH -2 contrast, -2 sharpness, 0 Saturation & -2 NR. If no grading is going to happen or I'm shooting products I might bump up the sharpness & contrast a bit. I used NOSTALGIC for a while but found it added too much warmth to the image & highlights went funny. SMOOTH has nice roll-offs and good skin tones.

  • 32GB Sandisk Class 10 Extreme HD Video 30MB/s SD cards for reliability. 2 of these make sure I have more than enough space for a day of shooting.

  • Official Panasonic batteries for max battery life, compatibility & reliability of the battery meter.

  • Voigtlander 25mm f/0.95 & 42.5mm f/0.95 - two beautiful lenses. The 42.5mm's ability to go 'click-less' is a very nice feature.

  • Tamron 18-50mm f/2.8 - a solid workhorse lens. Fully open and wide, this lens is a bit soft but it gets better around the 24mm mark onwards, stopped down a little. The short focus throw makes focusing a little tricky. Not knowing my exact f/stop is a bit annoying. My Novoflex adapter had issues connecting so I use a cheapo ebay adapter with iris control. This is the lens I use when I don't have time to use primes.

  • 50mm f/1.8 Nikon E-Series - the lens I used before I got the Voigtlander 42.5mm f/0.95. A great interview & portrait lens. Very forgiving on facial features. Dirt cheap. Here's a shoot using this lens and the Sanity hack: http://www.cblok.com.au/portfolio/promotional-video/

  • 100mm f/2.8 Nikon E-Series. A bit soft but it gets me out of trouble when I need some more zoom.

  • Custom Gini Rig: 2 x arm mounts, a follow focus and 1 x handle. The follow focus on this item is very, very good - BUT HUGE! I attach handles & a shoulder mount when I need it.

  • Zoom H4N recorder for audio

  • LN2MIC-ZMGH-MON cable for syncing audio from H4N to GH2 & monitoring. Set the headphone output of the H4N to 64, the input level on the GH2 to level 2 AND make sure you've installed the Pasadena Pulse Audio v2 beta patch which gives increased flexibility and quality with audio levels and recording.

  • Good headphones to monitor - I use the Sennheiser HD280 pro

  • Carbon Miller DS20 Solo. A solid, light, beautifully smooth tripod.

  • Small HD DP6 monitor for focus - the colour is always a bit off though.


For me to use a hack it must be ROCK STABLE. If it fails unexpectedly I never use it again. For this reason I only use:

  • Sanity 5 with Pasadena Pulse Audio v2 beta
  • Flowmotion 2.02 with Pasadena Pulse Audio v2 beta.

Sanity is my workhorse - super long record times, good quality, very reliable. Anything that is time limited or I've only got 1 x shot at, Sanity is used.

Flowmotion is if I want to push quality higher eg: on a short film or larger production with more time to set up.


Driftwood Seaquake: My first hacked shoot was with Driftwood's SeaQuake 24p. File sizes were huge, recording time was limited to 4 mins & my editor complained about the files being tricky to process due to their off the charts bitrates. My editor also mentioned that grading was tricky - the image seemed to fall apart easily. Visually, the results were outstanding, however the usability of this hack was it's limiting factor. Here's the shoot, we used the 25mm Voigtlander f/0.95 lens & a single 2K:


Driftwood Quantum x v4b Orion CBR (HBR): I used this hack for a while on corporate shoots. For the shoots I was doing (interviews), the large file sizes seemed unnecessary. This hack failed on me a few times with grass and trees so it was scrapped.

Driftwood Quantum x Orion v4d Dark Matter + HBR Fix CBR, Driftwood Quantum x v3 rocket RC 100+M, Driftwood Sedna Q20, Driftwood Span My Bitch Up v2b

All of the above hacks failed on me on HBR, generally on grass and trees.

Sanity 5 with Pasadena Pulse Audio v2 Beta:

This hack has generally been rock solid. The only times it has failed have been situations which the creator had already warned of. That is:

  • Shooting EX-Tele. Often it works, however times where there is a lot of movement it may fail. For example, I was shooting off a boat using EX-Tele. The mix of Tele-EX & lots of moving water caused constant fails.

  • Shooting using very high ISO. Generally I stick between 160-1600 ISO. Over 2000 ISO is gets a big dodgy. The night sequences of the shoot below caused constant fails due to high movement & high ISO - we wanted it grainy though. We used the Voigtlander 25mm 0.95 & LED lights.


Flowmotion v2.02 with Pasadena Pulse Audio v2 beta:

When I want more information in the high and low-lights, more room for grading & finer grain I use this patch. Generally pretty stable, I like how it handles low-light and my editor mentioned that grading was much better. Here's a test we shot that had TONNES of highlights which generally held together:


The above was shot with the NOSTALGIC setting - again, I'm not too happy with how this setting treats skin tones and highlights, but the hack held together well.

As for low-light - this film was shot with SMOOTH & the Flowmotion patch and worked very nicely: http://www.cblok.com.au/portfolio/short-film-3/ It's a shame I can't post the entire film as it's doing festival circuits at the moment.

So that's my experience and over-all workflow with this camera. Its been a great little camera, but I do often miss proper ENG style ergonomics - not to mention, built in ND filters! If anyone has any questions about what I mentioned, I'll try and answer them in batches.


Hi, New member wanting advice on GH1 please http://mail.personal-view.com/talks/discussion/16159/hi-new-member-wanting-advice-on-gh1-please Sat, 10 Dec 2016 14:54:48 -0700 photographer3000 16159@/talks/discussions Hi all, I'm new to this forum and must say you guys do one great job with the time you put in with the hacks and patches. There is so much info my head is going to explode so it's better asking you guys than looking through all the posts. I know it's 2016 but I'm just starting out and I have a GH1 and wanting to know what version of Ptools should I use and what patch/patches do I need but must be stable?? Thanks in advance.

GH2 - 2.5fps AVCHD 24h Timebuster/TimeHBusteR 2.0 settings - The day is not over! http://mail.personal-view.com/talks/discussion/2135/gh2-2.5fps-avchd-24h-timebustertimehbuster-2.0-settings-the-day-is-not-over Sat, 28 Jan 2012 23:53:20 -0700 duartix 2135@/talks/discussions Timelapses can be amazing, beautiful, strange, provocative. And FUN!

The day I discovered the GH2 could do 2fps I got so excited, I loaded up a full battery, put the camera on the balcony and aimed it at the shopping mall door. I got over 3+1/2h of Cinema 24p footage (@2fps) and after speeding it up 15x (to 300fps) in VirtualDub I almost couldn't believe my luck. This is what I got and I have yet to grade it properly:

Since that event, I wondered about the best way to patch up the camera to capture them. MJPEG was the obvious candidate. It's a Full Intra codec and it can be setup to capture just 2fps. That means absolutely no wasted frames unlike AVCHD, so MJPEG must be great, but there was a caveat: even with stock settings there was a capture time limit that was well below AVCHD. How is that possible since it's only capturing 2fps, the bitrates have got to be frugal? Well, it happens that there is a 2GB filesize limit within MJPEG so even after taking Driftwoods Quantum 100-50's MJPEG settings and cutting the quality to take half the bitrate, you will end with less than one hour of footage. Compare that to AVCHD and you see what got me started.

Then there was the IQ issue. I stumped into this: http://sonnati.wordpress.com/2010/10/19/h-264-for-image-compression/ which made me start another full set of tests (http://www.personal-view.com/talks/discussion/2111/gh2-mjpeg-resolution-findings-and-myth-busting/p1) in which I found that unlike most crazy MJPEG resolutions that only seem to be 720p upscaled, the one used on Driftwoods patch was the best that ATM can be extracted from MJPEG and that even rivals with AVCHD. That test ended up on a tie, so in my book AVCHD wins for flexibility and recording time.

At the same time these tests were taking place, I fought a lot with the stock settings trying to make a patch that used GOP 13 and yes, that's the frequency at which you see major block changes when you set the shutter speed to 1/2s. This GOP13 would insure excellent quality as it makes the result Full Intra once you trash the needed frames. But the frames and limits and buffers and modes were giving me all kinds of speed messages Hell. By that time I also discovered that the null B frames that encoded no changes at 2fps were much larger than P-Frames which also appeared a lot more frequently than I wished they would. Null B-Frames were 2.5x bigger than P and when there was movement, the P-Frames would take as much space (and sometimes even more) than I frames, so I had to do something about it to make it more efficient. Meanwhile Nick @Driftwood and @LPowell were kind enough to share their knowledge and let me in on a few tricks. These allowed me to suppress B-Frames altogether and starve P-Frames to death.

So here I was armed with a bazooka and a missile and I couldn't even fire a pistol. Then a few days ago @Balazer came out with his Cake patch featuring a completely VBR approach through a Constant Quantizer as if he couldn't care less about bitrates, limits or buffers or all the stuff that was putting me down. I tried it a 2fps and I couldn't believe how well it worked. And since the frame rate I'm using is ridiculous when compared to normal video modes, there are no speed/buffer/spanning issues even if you have the slowest SD card in the business. In this case, this VBR aproach is a no brainer and the cherry on top is that you get Constant Quality at Quantizer 22 which is very very good IQ!

So, hands to work, bake the Cake, mix Driftwood's MPEG settings, apply the P/B-Frame tricks and it was working on the third try. :O

It could have been a lot faster as I tried to best the 60i mode and leave all other modes alone. It ended up being the wrong choice because the 60i GOP isn't sticking and probably the Interlacing is making too big P-Frames around the I-Frames. In the end I managed to use tweak 24p for timelapses and the frame usage when there is no movement is a beautiful set of I-Frame spikes with all else almost null. 60i is now GOP13 on I/P frames exclusively and the P sizes look generous, so the starved P-Frames on 24p don't seem to affect it. 720p modes seem also unaffected. In the end this patch tries to give you the best 2fps and still leave you with 2 very workable modes without repatching: 1080i60 and 720p.

USE IT AND ABUSE IT. DON'T forget to weed out the starved frames in post. AfterEffects instructions here: http://www.personal-view.com/talks/discussion/comment/49325#Comment_49325 and freeware workflow is here: http://www.personal-view.com/talks/discussion/comment/39079#Comment_39079

Thank you @balazer for baking Cake.

Thank you @drifwood for the MJPEG settings and no B-Frame trick.

Thank you @lpowell for telling me how to starve the P-Frames.

Thank you @cbrandin for StreamParser 2.4 which gave me wonderful new numbers.



1 - TimeBuster 1 - First Release

  • Based on Cake v1. It uses GOP13, a Constant Quantizer VBR approach without B-Frames, minimum P-Frame size and quality.

2 - TimeBuster 1.1 - with 2 significant changes:

  • Now based on @balazer 's Cake 1.1, it has switched to use the Rate Control mechanism from @LPowell 's FlowMotion 100.

  • 720p mode was broken due to use of a very low quantizer (12) which lead to skipped frames in 720p. It now uses QP=20 on both 720 & 1080 modes which will have an observable effect in both bitrate & quality even though it still gives you 24+ hours on 64GB.

3 - TimeBuster 1.2 - with 1 significant change for a fully featured 720p mode:

  • Since @balazer 's Cake 1.1 is now heavily based on @LPowell 's FlowMotion 100, I decided to copy LPowells 720p settings since they will probably play better with the other modes. The only difference on 720p is a constant QP which had to be lowered yet from 20 to 21 because it still dropped frames on torture charts and/or sometimes present speed issues at very high ISO (>3200) on Class 10 SDs.

4 - TimeBuster 1.3 - with a lot of significant changes:

  • Ported to PTTools 3.64d

  • Savings on P-Frames is now accomplished by using a Scaling Table that is full of 0xFFFF for 1080p modes.

  • Quantizer boundaries were removed since they are now much more dependent on the new Quantizer Tables.

  • Redesigned for merging, these definitions try to be as independent as possible from their re-packaging definitions (in this case FlowMotion 1.1) and are published in two flavors: Timebuster 1.3 Base (for merging) and Timebuster 1.3 FloMo (merged with FlowMotion 1.1)

NOTE1: Timebuster Base 1.3 was merge tested with @LPowell 's FlowMotion 1.1, @Balazer 's Cake 1.2 and Nick @Driftwood 's Quantum X (v2) with minimal impact on all modes except for 1080p. I recommend FlowMotion or Cake for the simple reason that the 1080p24 Frame Limit is set to a much higher value in these settings. In fact, if you care for nothing other than the 24p timelapse IQ and don't mind impacting some of the other modes, you should set it to 10,000,000.

NOTE2: Merging Timebuster Base 1.3 with other settings is easiest done by loading Timebuster Base 1.3 first and then Alt+Clicking your choice of merger.

5 - Timebuster is now comprised of 2 main variants:

a) 24h Timebuster 2.0 - with the following changes (from TimeBuster 1.3):

  • The GOP for 24p is now married to 2.5fps. The bitrate hit is a little above 20% but the recording length can be easily compensated by raising the QP. As a benefit it's still very close to 2fps and it's the closest to a 360º shutter we can get on 24p.

b) 24h TimeHBusteR 2.0 (NEW, uses HBR 30)

  • Similar philosophy to 24h Timebuster 2.0 Base but as the name suggests, uses HBR mode instead of 24p. There is another difference, P-Frame quality is fully preserved as this kind of frames is used for one of the interlaced slices on Key Frames.

  • GOP married to 1/2.5 on HBR 30p (NTSC) and to 1/5s on HBR 25p (PAL). The big benefit is that both are using a 360º shutter. Uncheck "1080i50 and 1080p24 GOP Size=5" before merging if you don't plan to use Shutter Speed (SS) =1/5s and want to better preserve the 24p mode and HBR 25.

Both variants are now:

  • Using B-Frames. There is a 6% penalty in bitrate usage but this was necessary to make sure the QP was respected. I believe the gain from setting the QP at will is just too great to ignore, since not everyone wants to record for 24h straight. QPs as low as QP=16 were tested and theoretically it could go as low as QP=12 @ISO160 when merged with FlowMotion 1.11 on regular tripod mounted footage.

  • GOP married to 2.5fps. The bitrate hit is a little above 20% but the recording length can be easily compensated by raising the QP. The reason behind this was getting as close as possible to 360º.

  • User definable GOP - GOP can be set at will according to intended SS, use the attached "GOP-SS-table.png" to look up the right value. Defaults settings are SS=2.5fps and GOP 1080i=10 for 24h Timebuster 2.0 and SS=2.5/5fps and GOP 1080i50/i60=12/5 for 24h TimeHBusteR 2.0.

  • User definable QP - QP can be set at will according to desired IQ/recording length. I've gathered quite an amount of information so that in the future I can make an Excel tool to estimate the best QP from Card Size/Footage Snapshot/Desired ISO/Recording Length. Default settings are Q24/23 for 24h Timebuster/TimeHBusteR.

As before, there is the Base Release to be merged at wish with popular settings (load Base first in PTTools and then "ALT+Click" your choice of merger) and there is also the FlowMotion Release (already merged with FlowMotion 1.11). I've merge tested against @lpowell 's FlowMotion 1.11, @balazer 's Cake 95, and @bkmcwd 's GOP3ZILLA and no undesirable effects were observed. The key is using a VBR settings definition with a very high "1080p24 Frame Limit", especially if you are going for a low QP (<22).

(edit) If you want to merge with Nick @driftwood 's settings, I recommend going for Cluster v1 as shines in being both a long GOP set and also having the biggest "1080p24 Frame Limit" of all the sets I know.

6 - Updated Release of Timebuster/timeHBusteR 2.02 FlowMotion - WARNING HBR version IS BROKEN at 24p

  • (EDIT) This turned out to be a rushed release. Several users have reported problems with timeHBusteR (the HBR variant) It looks like FlowMotion 2.0(+) is highly dependent on GOP length (trough heavy use of GOP Tables, GOP Opt Tables and GOPx2 parameters). I'm investigating other possibilities right now so watch this space for further news. In the meantime I recommend you stick to timeHBusteR /Timebuster v2.0.

Since FlowMotion 2.02 looks very stable now, I'm releasing my pre-merged versions of Timebuster/timeHBusteR. There is nothing new regarding timelapsing except for FlowMotion's 2.02 changes.

  • 24h Timebuster 2.02 FlowMotion which is 24h Timebuster 2.0 Base merged with FlowMotion 2.02

  • 24h timeHBusteR 2.02 FlowMotion which is 24h timeHBusteR 2.0 Base merged with FlowMotion 2.02

7 - Updated Release of Timebuster/timeHBusteR 2.02 FlowMotion variants - 24p is now fixed on timeHBusteR. There was a note telling you should remove the "1080i50 and 1080p24 GOP Size=5" for better preserving 24p but no one seemed to read it and it was causing more trouble (to most of those who wanted 24p preserved) than it was worth (for those who wanted more timelapsing versatility.

NOTE: The mergeable timeHBusteR wasn't updated! Just the the FlowMotion variant. I ASSUME that if you are using this base for merging that YOU KNOW WHAT YOU ARE DOING, and read the DOC.

The day is not over. :)

GH2 NEW TOOL Katana http://mail.personal-view.com/talks/discussion/15897/gh2-new-tool-katana Mon, 17 Oct 2016 10:19:51 -0600 frullaccia 15897@/talks/discussions Waiting for GH5, this is a new hack for GH2. Two versions. All Intra. 720 and 1080-60 have to be tested. This hack uses Pasadena Pulse Audio by Per Lichtman.

GH2 hack HDMI output testing http://mail.personal-view.com/talks/discussion/356/gh2-hack-hdmi-output-testing Fri, 08 Jul 2011 14:57:32 -0600 EOSHD 356@/talks/discussions
- When a monitor is connected to the HDMI port, camera switches to an interlaced mode both on LCD / EVF and HDMI output
- When progressive 1080i -> 1080p patch enabled, camera can record without the usual hang if HDMI monitor is connected
- However AVCHD encoder still writes garbage to the card
- Garbage AVCHD files will playback in camera and not crash, if HDMI screen was connected at time of recording
- The output to LCD and HDMI is not garbage - seems 100% unaffected by current PTools AVCHD patches
- Pulling HDMI cable during recording ends clip, camera switches to live view mode
- Output is always 1080i on 'auto', never progressive regardless of camera mode or PTools config (I am now testing with HDMI option in menu set to 720p)

@Vitaliy_Kiselev has interesting comment - "Good thing is that some HDMI related functions names are present is some debug messages as well as their arguments names"

I am using a SmallHD DP6 as monitor, we can also use TV or PC screen with HDMI, be sure that it displays reported input signal type (i.e. 1080i or 1080p).

Aim: clean high bitrate progressive video instead of current bad cadence 24p -> 1080i.
Or even uncompressed signal. 1080/60p would also be great target but let's start small!

Testing continues...]]>
I need an answer. What is the best hack for the GH2? http://mail.personal-view.com/talks/discussion/15581/i-need-an-answer.-what-is-the-best-hack-for-the-gh2 Wed, 24 Aug 2016 14:55:37 -0600 airchase 15581@/talks/discussions I realize there are several threads in the same vain as this, but the conclusion in every single one of them is "try a bunch, use what you like".

Unfortunately, I don't have the time or ambition to try loads of different patches, and I would really love if someone could give a solid answer as to what the best patch is. The answer of "it's a matter of personal preference" is a cop-out, and in my opinion is incorrect. A better image, is a better image.

I've done a lot of research, and it appears Moon T8 is a popular option but I've also seen this video on Youtube using the Intravenus hack which looks absolutely stunning.

So, let's put an end to the ambiguity. What is the best hack for the GH2?

GH2 Hacks: Driftwood vs Ptool. Which one(s) and why ? http://mail.personal-view.com/talks/discussion/15539/gh2-hacks-driftwood-vs-ptool.-which-ones-and-why- Thu, 18 Aug 2016 11:59:30 -0600 monks19 15539@/talks/discussions Hi. I still use my Lumix GH2 for filming (un-hacked) and I would like to know what those hacks really offer more. I know that the main ones are the Driftwoods and Ptools, but I don't have much information on them and I would like to know which one's the best to use (with exemples, if possible) ?

Can anybody here please help me withthis ?

Thanks to answer

24p versus HBR http://mail.personal-view.com/talks/discussion/4185/24p-versus-hbr Wed, 08 Aug 2012 22:53:28 -0600 kurt111111 4185@/talks/discussions Pros and cons, Which one do you prefer and why? I'm using cluster 6 right now.

GH1: Blackout-Powell Native 24p settings v2 http://mail.personal-view.com/talks/discussion/184/gh1-blackout-powell-native-24p-settings-v2- Sun, 05 Jun 2011 23:52:43 -0600 LPowell 184@/talks/discussions
To make use of these new features, download PTool 3.55d from the following link:


For version 2 of the Blackout-Powell Native 24p Patch, I've prepared a choice of two INI settings files that differ only in the settings for the MJPEG 30p modes:

* For use with standard lenses, the standard patch will produce two types of MJPEG videos:

HD mode: 1280x720 HD videos in 4:2:2 color depth, with peak bitrates up to around 60Mbps.
VGA mode: 960x720 iPad-compatible videos, with peak bitrates up to 30Mbps.

* For use with anamorphic lenses, the anamorphic patch supports two different squeeze ratios:

HD mode: 1920x720 videos optimized for 1.5X anamorphic lenses, with peak bitrates up to 50Mbps.
VGA mode: 1920x720 videos optimized for 2X anamorphic lenses, with peak bitrates up to 50Mbps.

GH2 vs Flow Motion V.2.2 lowest bit rate http://mail.personal-view.com/talks/discussion/14841/gh2-vs-flow-motion-v.2.2-lowest-bit-rate Mon, 21 Mar 2016 09:27:41 -0600 Jessy 14841@/talks/discussions Hi, I would like to pose a question to the experts, I have a motion flow gh2 with v2.2 which records at 100 m / bit and I've never had any problems.

Someone tells me that might crash the recording if the use for 3 or 4 continuous minutes, and I've never tried it, but I want to ask you whether it is possible to lower the bitrate perhaps 80 m / bits? thank you

Hack for Sony SLT A65 v http://mail.personal-view.com/talks/discussion/15222/hack-for-sony-slt-a65-v Wed, 15 Jun 2016 06:16:50 -0600 Rockets 15222@/talks/discussions Anyone know of a hack for the Sony SLT a65v to change From Japanese to English in menu system i understand it has been done for cameras that run play memories app

Panasonic G2 is it possible to record video in 4:3 http://mail.personal-view.com/talks/discussion/15046/panasonic-g2-is-it-possible-to-record-video-in-43 Thu, 05 May 2016 13:13:02 -0600 JemRaid 15046@/talks/discussions Hello all,

I am going to combine still images of which I have 1,000's at 4:3 with videos from my G2 I make digital art montages and use video software to make them into slowly merging cross fades I now want to incorporate some video footage but at 4:3 and not 16:9 My idea is to take some video footage, of say a river with the camera in a fixed position on a tripod and then add some still images from the same position, I do not want to start making still image in 16:9.

May I ask if this is possible please?

Cheers - Jem

NEX7 English menu http://mail.personal-view.com/talks/discussion/15023/nex7-english-menu Thu, 28 Apr 2016 10:25:45 -0600 eruan99 15023@/talks/discussions I browsed through the other forums dedicated to making non-English NEX menus into English. However, most replies are from 2013. I was wondering if there was any success since? I just bought a used NEX-7 and the menu is in Japanese. No language change option.

GH2 delete on original back http://mail.personal-view.com/talks/discussion/14989/gh2-delete-on-original-back Tue, 19 Apr 2016 13:59:05 -0600 alex178sport 14989@/talks/discussions Hello, I installed the hack at the gh2 , now have him removed Timeout , iso limit . But the auto iso goes on to iso 6400 instead of iso 3200. How do I get out of the auto goes up iso 3200th Has an idea .

greet alex

GF2 ISO setting issues http://mail.personal-view.com/talks/discussion/2328/gf2-iso-setting-issues Sun, 19 Feb 2012 11:30:18 -0700 tmo_germany_gf2 2328@/talks/discussions Guys, first of all thanks to Vitaij for the hack - the donation did help, glad to see this!

I am new in this forum and have applied the hack for the GF2 with the settings as per attached file: languages = all maximum ISO limit removal = ticked

However, after saving the file and updating the f/w, a) the languages are still the same b) I have no idea how to change the ISO mode for the video mode as there is no menu entry which I have found. => Can you give me a hint how I can change the ISO mode for video recording, please.

Thanks, Torsten

AUDIO LEVEL OUTPUL DROP AFTER HACKING GH2 WITH Flow Motion v2.02 HACK http://mail.personal-view.com/talks/discussion/14883/audio-level-outpul-drop-after-hacking-gh2-with-flow-motion-v2.02-hack Sun, 27 Mar 2016 19:30:52 -0600 T2iRebelvsGH2LOUIS 14883@/talks/discussions Can anyone help me this issue. I have hacked my GH2 with the Flowmotion v2.02 Hack and since doing so the recording audio output level has fallen so low that I have to set my GH2 to level 4 audio gain to hear anything. this means more noise. Has anyone had his problem before?